Model Number

from 0.6kg to 9kg

	Special Marks: Cylinder made by stainless steel Better strength, not easily corrode, safety and reliability Surface and wonderful
General Data: Standard:GB4351-1997(equal:ISO/DIS7165:1995) Propellant: Nitrogen Use temperature(1211):-20°C~+55°C Use temperature(BCF):5°C~+55°C	Particular areas of use: Hotels Plane, Car, Ship Office buildings Chemical factory, chemical depots Cars and trucks Food industry Hospital industry   Type of extinguisher Extinguishing agent Amount of Extinguishing agent Discharge time Dimensions  (mm) W�H Total weight MY0.5 1211(BCF) 0.5kg ≥6 sec. Φ66�240  1kg MY1 1211(BCF) 1kg ≥6 sec. Φ85�280 1.7kg MY2 1211(BCF) 2kg ≥8 sec. Φ102�408  3.1kg MY4 1211(BCF) 4kg ≥9 sec. Φ120�510  6.1kg MY6 1211(BCF) 6kg ≥9 sec. Φ160�530  9.2kg MY9 1211(BCF) 9kg ≥12 sec. Φ160�650 13.6kg MSQZ2 3% AFFF 2kg ≥15 sec. Φ102�408  3.1kg MSQZ3 3% AFFF 3kg ≥20 sec. Φ120�470 5.1kg MSQZ6 3% AFFF 6kg ≥30 sec. Φ160�530 10.5kg MSQZ9 3% AFFF 9kg ≥40 sec. Φ160�650 14.5kg 　 SUSPENDED THERMOSTAT TYPE 1211FIRE EXTINGUISHER (Stainless steel cylinder) Type of extinguisher Amount of Extinguishing agent protected volume ( at 5% conc.)M3 Dimensions  (mm) D�H Total weight MYZ4 4 10.7 234�250 7kg MYZ6 6 16 272�270 8.8kg MYZ8 8 21.3 298�290 12.6kg MYZ12 12 32 342�310 18kg 　 Note:   1.The initial spray temperature is the initiation temperature of thethermosentive glass bubble. The initiation temperature is designed at 57°C or 68°C or 79°C or 93°C, which could be selected in ordering according to  requirements.  2.the protected volume shown above is typical for concentration of 5% by volume and will vary when higher or lower concentration is considered to be satisfactory.